Stencil cut faces with push through letters can be opaque or back lighted. Panels can be supplied from many substrates including aluminum, acrylic and plastic.

• We can stencil cut almost any type of panel and provide several options of lettering for these panels.
• Panels can be left as cut with the wall showing through the openings of the letters.
• Panels can be backed with another substrate either opaque or translucent.
• "Push-through" letters can be provided that drop through the panel. The lettering is then bonded to a piece of material on the underside of the panel with adhesive holding the letters in place.
• "Push-through" lettering can be provided that have a flange (rabbit) around the base to keep the letters from falling through when the lettering is inserted from the back. The letter can be cut from clear material and translucent vinyl applied to the back adding color to this type of signage or for back lighting.
• On wooden panels we can also pocket cut the panel to make the letters project through the face even through thick panels.

  Place an order

  Back to top